• Description: How to remove the CPI from the probe casing

1. Remove 14 total hexagonal screws along the canister.
2. Remove bottom of the casing.
3. Remove 3 Philips screws along the side of the rectangular casing.
4. Unscrew the hex-head post on the bottom of the instrument by the circuit board box.
5. Pull instrument free from casing.

Figure 1: Picture of the bottom of the CPI casing with yellow arrows to show location of hexagonal screws along the container.

Figure 2: Picture of the top of the CPI container with yellow arrows to show the 3 Philip-head screws

Figure 3: Picture of the hex-head post located by the circuit board box.