Differences

This shows you the differences between two versions of the page.

--- atmos:citation:cals:cdp:home:cloud_droplet_probe [2011/08/31 17:09] – nicole.bart
+++ atmos:citation:cals:cdp:home:cloud_droplet_probe [2020/01/29 17:25] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-=====Cloud Droplet Probe Spinning Disk Perforamance Checks=====
+=====Cloud droplet Probe (CDP) Performance Checks=====
+=====Cloud Droplet Probe (CDP) Spinning Disk Perforamance Checks=====
 ==== Steps to use the spinning disk on the Cloud Droplet Probe (CDP). ====
@@ Line 16: / Line 18: @@
   - Once the best alignment is obtained, not the channel values. \\
   - Save the M300 data files on the shared network drive. \\
 ===== Steps to obtain information from the CDP performance checks. =====
@@ Line 69: / Line 45: @@
   - Find the pre-peak, peak, and post-peak counts.  Do this first by looking at the plot of the spectrum.  Find the channel of the peak on the plot.  In the example, the peak channel is channel 5.  The values in the text window are the counts in each channel.  In the example, the pre-peak counts are 351,peak counts are 676, and post-peak counts are 178.11.
   - Calculate the Water Equivalent Size, Average Channel, and Standard Channel Size.  Run the program avg_channel by entering into a terminal <code>avg_channel</code>  The program will calculate Water Equivalent Size, Average Channel, and Standard Channel Size.
 ====Example: ====
@@ Line 88: / Line 61: @@
 {{:atmos:citation:cals:cdp:home:cdp_calibrationcplot.png?300|Spectrum plot: 07/13/2011}}
 {{:atmos:citation:cals:cdp:home:spectrumcplot.png?300|XY Plot: 07/13/2011}}
+===== Steps to perform CDP Calibration to get Threshold Tables values for the M300 Data System. =====