User Tools

Site Tools


atmos:ch422:home

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
atmos:ch422:home [2018/04/19 16:27] gilmoreatmos:ch422:home [2020/04/06 17:15] delene
Line 1: Line 1:
-Clifford Hall 422 (CH422) is primary usage for undergraduate student research.  Below is a list of CH422 computers. \\ +Clifford Hall 422 (CH422) is primary usage for undergraduate student research.  See [[http://wiki.atmos.und.edu/doku.php?id=atmos:ch422:home| list of CH422 computers for details]]. \\
- +
-Below is a map of CH422 with the locations of the different computers. Note the door in the bottom left corner for orientation\\ +
-The names of computers and their operating systems are found below the map. \\ +
- +
-M110670  M53868  M141560  M100695 \\ +
-M110590  Nuclei  Wedges   Derecho    LaptopStation \\ +
-Aitken   Haboob  Aurora   Mammatus   Sleet \\ +
-//Door//             Rayleigh Radar2 +
- +
- +
-**Name**     **OS** \\ +
-Aitken     Redhat \\ +
-Aurora     Mint \\ +
-Derecho    Mint \\ +
-Haboob     Mint \\ +
-Laptop     N/A \\ +
-M100695    Windows 7 \\ +
-M110590    Windows 10 \\ +
-M110670    Windows 7 \\ +
-M141560    Windows 7 \\ +
-M53868     Windows 7 \\ +
-Mammatus   Mint \\ +
-Nuclei     Mint \\ +
-Rayleigh   Mint \\ +
-Sleet      Redhat6 \\ +
-Radar2     Redhat5 \\ +
-Wedges     Mint \\+
  
 ---- ----
 __** __**
-How to use the projector**__+How to use the overhead projection system**__
  
-1.  Turn the key on the wall, next to white board, to deploy the screen from the ceiling.+1. Ready the Projector & Screen 
 +   a. Turn the key on the wall, next to white board, to deploy the screen from the ceiling
 +   b. Retrieve the projector's remote control from the drawer next to the exit door. 
 +   c. Press the "on" button on the remote (upper right, green) 
 +       You will see "startup" information displayed on the projection screen,  
 +          including an "ID" in the upper left corner.  Note this ID number for later use.
  
-2.  Retrieve the remote control from the drawer next to the exit door.+2. Ready the Computer(s) 
 +   a. Login to at least one PC Windows computer in this room. 
 +   b. Search for a software program called "WPS" Create a desktop shortcut if desired.   
 +   c. If WPS does not exist, you may need to have it installed first.  See Dr. Delene.
  
-3.  Press the "on" button on the remote (upper right, green+3. Using the Wireless Presentation System (//WPS//) software 
-    You will see "startup" information displayed on the screen, including instructions for connecting, and an IP Address.+   a. Launch WPS from the PC(s). 
 +   b. Type in the login password information (taped to the remote control) into the WPS GUI. 
 +   c. Type in the "ID" (was showing on the startup projection screen) into the "Login ID" on the GUI. 
 +   d. The PC monitor should now be mirrored on the projection screen.
  
-4.  Login to any PC Windows computer.+//Repeat steps 2-3 for up to separate PC's in the room.  Toggle between them using the remote.//
  
-5.  Search for a Program called "WPC" Create a desktop shortcut if desired. +4. When you are done 
- +   a. logout of the Windows computer(s)
-6.  Start WPC.  +
-   a. Type in the login password information (taped to the remote control) into the WPC GUI. +
-   b. Type in the "projector ID" which should be showing on the top left corner of the screen. +
-   c. The screen you see on your PC should now be displaying on the projection screen. +
- +
-7. When you are done +
-   a. logout of the Windows computer. +
    b. return the remote control to the drawer    b. return the remote control to the drawer
    c. turn the wall key to return the screen to the ceiling.    c. turn the wall key to return the screen to the ceiling.
  
-//Note that Dr. Delene says this should also work with laptops (both Mac and PC) after downloading the WPC software.//+//Note that Dr. Delene says this should also work with laptops (both Mac and PC) after downloading the WPS software.  However, he says you would need to use the **CH422** WiFi Network instead of the generic **UND** WiFi Network.  // 
 + 
 +Also, for more information about WPS, the users manual can be found online here: [[http://files.ipevo.com/download/doc/wpshd_new/New_WPS-HD_Manual.pdf]] 
 +The WPS Software can be downloaded here: [[https://www.ipevo.com/support/qa/High-Definition_Wireless_Presentation_System_8006]]
atmos/ch422/home.txt · Last modified: 2020/07/30 23:40 by david.singewald