Atmoswiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Uploading Data Files to a UND Server=====
===Software needed===
     +an SSH client such as PuTTY
     +an SCP client such as WinSCP
===1. Log on to server using SSH client===
==For the Aircraft server use the settings below==
{{:atmos:software:putty.png}}
===2. Navigate to the correct data directory===
==For the Saudi project the directory is /nas/und/SaudiArabia/2023/Aircraft/CitationII_N555DS/FlightData or GroundData==
===3. Create a directory for the data===
==Directory is named according to the date and time of the data file in the format YYYYMMDD_HHMMSS==
==Within that directory create a second directory for the instrument (name: instrument_data), or one post processing directory (name: PostProcessing)==
===4. Log onto server using SCP client===
==For the Aircraft server use the settings below==
{{:atmos:software:winscp1.png}}
==Also under Advanced.. select Transfer Settings Rule.. to ensure everyone has the correct permissions once the files are uploaded. Use the settings below==
{{:atmos:software:winscp2.png}}
==note: you must add a description in order to save these settings!==
===5. Navigate to the correct folders===
==The left half of the screen should be where the data files are located on your local device==
==The right half of the screen should be the second directory created in step 3==
===6. Copy the files===
==Drag and drop the files from the left side of the screen to the right side of the screen==