Differences

This shows you the differences between two versions of the page.

--- atmos:3d-paws:und00300 [2021/03/06 18:37] – delene
+++ atmos:3d-paws:und00300 [2023/01/26 18:23] (current) – [Instrument Log] david.brannon
@@ Line 7: / Line 7: @@
   * NCAR CHORDS ID - 66
   * Location - Clifford Hall Roof (South Side Pole Outside of Clifford Hall
-  * Status - Active, frame installed, rain gauge currently disconnected, MCP9808_T currently not sending data, wind vane tail needs replacement
+  * Status - Testing
 ==== TeamViewer Info ====
@@ Line 14: / Line 14: @@
 ==== Instruments ====
-| Anemometer            |  Active  |
+| Anemometer            | Active |
-| Wind Vane             |  Active  |
+| Wind Vane             | Active |
-| Radiation Shield      |  Active  |
+| Radiation Shield      | Active |
-| Light Sensor          |  Active  |
+| Light Sensor          | Active |
 | Rain Gauge            | Inactive |
@@ Line 23: / Line 23: @@
   * 11/24/2020: Wind Vane is misaligned, data is inaccurate. Instrument removal needed to fix
   * 12/18/2020: Reset power
   * 01/08/2021: Wind vane fixed but needs re calibration. Pi tube was blown off, may need glued on if issue recurs
+  * 03/15/2021: Station removed from roof of Clifford Hall
+  * 05/09/2021: Testing and debugging. Pi currently running SD card labeled 3D-PAWS ver. 20210302. All instruments sending data sans Wind Vane.
+  * 02/15/2022: System updated and debugged. Currently in the process of repackaging and testing waterproofing measures. All instruments functioning but needs calibration.
+  * 10/23/2022: Removed from roof. Inconstant and poor data is being recorded. currently inspecting for loose wires and replacing as needed. So far radiation shield and tipping bucket have been inspected. Tipping bucket has been replaced.
+  * 10/31/2022: Reset on roof, All instruments are functional.
+  * 11/15/2022: Removed precipitation sensor. Capped for the season.