atmos:3d-paws:und00300
This is an old revision of the document!
Table of Contents
**UND 00300**
Status
- Active
- Frame installed
- Needs more stability for rain gauge
- Rain gauge currently disconnected
- MCP9808_T currently not sending data
- Wind vane tail needs replacement
Location
- Clifford Hall Roof
- Possible future location: Dakota Science Center
TeamViewer Info
- ID: 352 565 098
- Pass Word: Airborne Standard Password
Instruments
| Anemometer | Active |
| Wind Vane | Active |
| Radiation Shield | Active |
| Light Sensor | Active |
| Rain Gauge | Inactive |
Photo
Instrument Log
- 11/24/2020: Wind Vane is misaligned, data is inaccurate. Instrument removal needed to fix
- 12/18/2020: Reset power
- 01/08/2021: Wind vane fixed but needs re calibration. Pi tube was blown off, may need glued on if issue recurs
atmos/3d-paws/und00300.1610393569.txt.gz · Last modified: 2021/01/11 19:32 by ryan.kucera