atmos:3d-paws:und00100
This is an old revision of the document!
Table of Contents
**UND 00100**
Status
- Active
- Frame Built
- Needs 12ft cable extensions made before installation
Location
TeamViewer Info
- ID: 736 596 124
- pwd:
Instruments
Anemometer | Active |
Wind Vane | Active |
Radiation Shield | Active |
Light Sensor | Active |
Rain Gauge | Inactive |
Issue: Upgrade from Jessie to Stretch
- The 3d-paws program did not work after upgrade.
- Seems there is no python module requests
Lab Note Book
- 2020/12/31 - David Delene: Updated Raspberry Pi operating system from Debian Jessie to Stretch, which enable Teamviewer to be upgraded from version 13 to 15 and allows us to connect.
- 2020/10/30 - Installed on top of Met-Trailer. Location: 47 51' 51.13“ N and 96 56' 06.85” W
atmos/3d-paws/und00100.1609477120.txt.gz · Last modified: 2021/01/01 04:58 by delene