atmos:northpolradar:radar_needs
This is an old revision of the document!
Radar Needs
(last updated October 2011)
- Reseal radome with silicone on inside, have the radome professionally sealed and painted on outside, or replace entire radome with new.
- Fix wedges to help seal radome hatch.
- Better solution to prevent water from dripping on the AMR in radome. Currently a blue tarp is hanging over the top of the AMR.
- New Plywood sheet for hole on floor in radome.
- New RVP8 computer (motherboard) and configuration (1 rx board w/ 1 IFD).
- Fix safety switch in radome…loose connection.
- Clean slip rings and lubricate gears (every spring).
atmos/northpolradar/radar_needs.1319228406.txt.gz · Last modified: 2020/01/29 17:25 (external edit)