atmos:citation:instruments:raspberrypi_setup:home
This is an old revision of the document!
1.Change the hostname to TIMMS-SN00XXX etc/hostname “TIMMS-SN00XXX” Example for TIMMS SN00200“ in the command line use “sudo vi etc/hostname TIMMS-SN00200”
2. Change etc/host ex. use the command “sudo vi etc/hosts” then from here set 127.0.1.1 to TIMMS-SN00XXX with the serial number of the tripod
3. Update the base raspberry pi software using the command sudo apt update to check available updates then sudo apt upgrade to perform the updates.
Setup Anydesk security to unatteded access
Set Password to standard password
atmos/citation/instruments/raspberrypi_setup/home.1709935506.txt.gz · Last modified: 2024/03/08 22:05 by benolson