• Project: IMPACTS - Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms
• Dates: January and February 2022
• Location: North East (United States)
• Platform: NASA P3
• Tail Number: N426NA
• Flight Level Processing Script: process_all_impacts

• Instrument Status
• Daily Health Checks
• Weather Briefings
• ESPO IMPACTS
• Field Catalog
• Missing Tool Suite
• Chat Setup

• 2020 Field Campaign: IMPACTS 2020

Note: The files below may be updated or added to frequently. Please view the most recent version on the UND “Aircraft” server in the locations listed.

• Aircraft Configuration Document: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/Documents/Configurations
• Probe Operator Checklists: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/Documents/Checklists
• Probe Maintenance Checklists: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/Documents/Checklists
• M300 Tables: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/Documents/M300_Table_Archive
• Ground Test Data: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/GroundData
• Flight Data: /nas/und/NorthEast/2022/Aircraft/P3_N426NA/FlightData

• Probe Covers (HVPS, CDP, King, etc).
• IPAD and holders
• Cable Ties
• Spare Network cables
• Spare USB to Network adapters
• Spare label maker tape
• USB sticks for instruments

• Set the HVPS3-B computer to not boot on power on. Have to remove cover and set jumper switch.
• See about getting old M300 system booted or updated with new system.
• Holder for in front of 2DS for mist generator.

• 2DS Can Low Pressure
  • Issue - The 2DS pressure went < 9 psi; while the HVPS3 pressures remained high.
  • Cause - Like cause is a bad o-ring or seal on Can. Will remove probe and check o-ring.
• Downlinking Data
  • Issue - On NASA system not getting down link packages from the M300. Will ground trouble shoot.
• Hawkeye TimeSync
  • Issue - Have to manually set the time on the Hawkeye computer.
  • Cause - Works on other computers and can ping the NTP server. Will ground trouble shoot.
  • Fix - Needed to adjust the Time server IP address in the 'NTP Time Server Monitor (the application is on the desktop). Had to click on the NTP Configuration File tab and scrolled down to replace the old time server IP address. Next, we had to run the 'SPEC NTP Sync' application (also located on the desktop) which allowed the time to sync up with the P-3. Now the time should sync up with the aircraft upon boot-up.
• M300 WCM Data
  • Issue - Need to adjust M300 configuration so Data status window correctly displays getting WCM data.

• HVPS-3A Connection issue
  • Issue - Software was not able to connect the the probe. Was able to ping the probe through the software and through a command prompt. Still no data.
  • Cause -
  • Fix -

• UPS
• Dual Monitor KVM
• Tool Box
• Wireless Keyboard - Right Rack