Table of Contents

Remote Desktop Connection

Using the Aerospace network

On the Start menu, search for “Remote Desktop Connection” using the search bar and click to run it. Enter either the IP address (CH422 computers listed at bottom of page) or the computer name (example below) of the computer in need of remote access in the Computer box and click 'Connect'.

computer_name.aerospace.local

Enter username (as 'AD\username', usually as 'AD\firstname.lastname') and password into the box and click 'OK'. To end connection and log off the remotely-accessed computer, click the Log off button in the Start menu.

Using CampusVPN

While connected to the campus VPN (instructions found here), go to the Start menu and search for “Remote Desktop Connection” using the search bar and click to run it. Enter the IP address of the computer in need of remote access (CH422 computers listed at bottom of page) in the Computer box and click 'Connect'. Enter your Aerospace username and password with aerospace\ before the username and click 'OK'.

AD\username

Click 'Yes' to connect anyway despite certificate errors. To end connection and log off the remotely-accessed computer, click the Log off button in the Start menu.

Using rdesktop through the Terminal (easiest)

Clifford Hall 422 Windows Computers

See list of computer in Clifford Hall 423.

Enabling Remote Desktop on Host

Typically, you have to enable VPN on each computer. If you get the following erro

Failed to initialize NLA, do you have correct Kerberos TGT initialized ? Failed to connect, CredSSP required by server (check if server has disabled old TLS versions, if yes use -V option).