The point of this page is to show how to use SkyVector to get the Range/Bearing from different VORs to a desired latitude/longitude. This is useful when Radar operators need to navigate the Citation aircraft to points of interest (without actually having to program in every airport and VOR into IRIS).


[[http://skyvector.com/| SkyVector]]


----


-Right-click your starting airport >> click the "PLAN" button next to the airport or airport identifier. A flight plan box should appear in the top left.


-In the space under "Enter waypoints separated by spaces", you can type in the lat/lon coordinate you wish to get the range/bearing to from your starting airport. The lat/lon can be entered in any of the following ways:
  
  * 47.5054,-91.6809
  * 47.5054/-91.6809
  * n47d56m35w91d35m12
  * 344309N/0764157W (NOTAM style)

Where n(N) designates North, d = degrees, m = minutes, w(W) designates West. Make sure to __NOT__ included spaces in you lat/lon coordinates even though it says to do so.

-Click 'Add' and it will show you the range/bearing from your starting point to your coordinates.