Differences

This shows you the differences between two versions of the page.

--- atmos:citation:instruments:m300_data_system [2015/10/09 23:22] – aneumann
+++ atmos:citation:instruments:m300_data_system [2020/01/29 17:25] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
   * Serial Number: 3038
   * Purchased: June 20, 2005: Instrument received at UND for initial testing.
+  * Weight: 50.4 lbs.
 ===== Change Log =====
@@ Line 21: / Line 22: @@
 November 7, 2012 Installed 1D#0  0x0700  S/N 1033 in the M300 for the PCASP probe.
+===== Check Disk at Startup =====
+If you get a black screen at start up it is likely do to a system file problem on disk
+Add chkfsy -vP / after /etc/netstart in /etc/config/sysint
 ===== Tag Number Standard =====
@@ Line 74: / Line 80: @@
 ===== Problems and Solutions =====
+==== Problem: Setting Time With The M300 (July 23, 2019) ====
+/home/
+.kshrc
+Using **alias gpst='timesync -b 9600 /dev/ser10'** to sync the computer software does not also sync the hardware.
+**Cause:**
+Permissions issue: to change the hardware clock, must be a superuser.
+**Temporary Solution:**
+Use **su** command to become root, type in password.
+Use **rtc hw** command to sync hardware clock.
 ==== Problem: Cannot Change M300 Projects (October 9, 2015) ====